What Every Housing Provider Should Know Before an Inspection

2026 Edition

Prepared by a Colorado rental licensing inspector, who understands what it means to be a landlord, to help housing providers navigate the licensing process with clarity and confidence.

Disclaimer

Factual and regulatory accuracy is intended but cannot be guaranteed. The reader assumes all risk associated with operating their rental property. The author makes no representations or guarantees regarding compliance with current or future regulations.

Executive Summary

This guide is intentionally comprehensive, but your time is valuable. If you take away one key point: work with a knowledgeable, practical inspector, schedule your inspections, and complete the process.

If you want a clear understanding of what is inspected, how to prepare, and what regulators expect to see in your units, read on. Most inspection issues are simple and preventable with the right preparation.

Why This Guide Exists

Denver and Boulder’s rental licensing requirements have introduced a higher level of operational responsibility for housing providers. 

The process is straightforward once understood. However, the inspection guidebook is long, complex, and, occasionally misaligned with real world guidance provided to inspectors and landlords.  

Further, the checklist can also create unnecessary uncertainty, causing some housing providers to delay scheduling inspections altogether..  

This guide is intended to demystify the process, allowing you to make clearer decisions and move past the licensing hurdle for the next four years.

The rental licensing system is designed to ensure rental housing is safe and habitable.

From the perspective of the regulators, the program is designed to:

  • Protect tenant health and safety
  • Make sure properties meet minimum housing standards
  • Provide accountability for landlords
  • Create a way for the city to enforce compliance

From a landlord perspective, the program also functions as a baseline safety check, reducing the likelihood of liability exposure or denied insurance claims due to missing basic safety measures.

This guide highlights the most common inspection challenges and provides practical preparation strategies so your property — and your team — can move efficiently from inspection to license approval, good for 4 years.

A significant portion of licensing non-conformances arise during tenancy because of tenant behavior, rather than from landlord neglect. Common examples include tenants removing smoke alarms, damaging doors or walls, creating unsanitary living conditions, or introducing pests such as vermin and bedbugs. 

Despite this, landlords are ultimately responsible for addressing and correcting these issues to meet licensing requirements.

Yet, most inspection issues are preventable with proper preparation.

 And there is no foul in not being fully compliant at the time of inspection, having the inspector point out the missing item(s) and correcting them after the fact for validation by the inspector. 


Quick Start Guide:

  1. Schedule inspection
  2. Precheck if units inspected:
    1. Have smoke alarms in bedrooms
    2. Have CO and Smoke alarms in hallways on each level
    3. Have GFI outlets in Bath
    4. Have fire extinguishers in common areas or in unit
  3. Perform inspection
  4. Make any identified corrections (only if needed)
  5. Apply for license. 


Timelines:

A Denver or Boulder rental license is good for 4 years. 

In Denver, the rental license application must be submitted within 90 days of inspection, or a new inspection is required.  In Boulder, the inspection report is valid for one year.

In both counties the renewal application may be submitted up to 90 days prior to expiration. In Denver, the renewal application must be submitted prior to expiration. In Boulder, you may renew up to 90 days post expiration.  

Applying for a rental license in Denver with a non-passing inspection report, and paying the licensing fee to the City appears to give the applicant up to 1 year from the date of application to resolve items.

This is stated on the inspection checklist: “An application must be submitted within 90 days of the initial inspection, non-compliant items must be resolved and documentation submitted within one year of application”

The license is not issued until all inspection items are resolved and the finalized, passing inspection checklist is uploaded to the City. 

However, the applicant has a rental license number issued by the City, and appears to be exempt from enforcement for “operating an unlicensed rental”. 


Top Reasons Rentals Fail Inspection

Across property types and neighborhoods, the same issues appear repeatedly. Addressing these items before an inspection can make your inspection smoother.  

When in doubt, it can be more cost efficient to have the inspector recommend how to meet codes, rather the property manager proactively overdoing things. Yet, you can never be too safe, so overdoing things is never actually a bad course of action.


Most frequently cited deficiencies include:

  • Missing or older than 10 yr smoke alarms. Every bedroom needs a smoke alarm on the inside of the bedroom, and a smoke and CO alarm, on the other side of the bedroom door, in the hall, within 15’ of the bedrooms.
    Alarms may not be older than 10 years to ensure they function reliably, and they must have the batteries installed. Testing the horn confirms the alarm will sound—but does not confirm it can reliably detect smoke.
    If there is a ceiling fan, the smoke alarm must be at least 3’ from the edge of the ceiling fan, or the farthest possible distance from the fan.
  • Missing fire extinguishers. Each house needs a single residential fire extinguisher. The type  within 75’ of apartment/condo units in halls. Fire extinguisher life span varies by brand, typically after 6 years, reliability becomes uncertain.   The  fire extinguisher must be  accessible, and fully charged at time of inspection (the pressure gauge must show green).
    • Multi-family housing must have a minimum rating of 2A:10BC for fire extinguishers. 
  • Missing carbon monoxide alarm (required per Colorado State Law on every level, and within 15’ of any bedroom doors on that level)
  • Lack of required GFCI electrical protection in each bathroom. Sometimes multiple bath outlets are tied to a single GFI located in one of the baths, the lack of a GFI doesn’t mean the outlet is not GFI protected. A simple $9 GFI plug tester can validate this. 

Other, yet less common inspection findings

  • Lack of any outlet in a bathroom.
    Older Victorian houses often lack any bathroom outlet, and sometimes even the light switch is outside the bathroom. If the light switch were inside the bathroom, a combination GFI outlet / switch can be installed in the single gang electrical box. This is often the most cost-effective compliance option. Some baths have a non-GFI protected outlet as part of the light above the sink. This is considered a safety hazard and should be eliminated. Dropping a shaver or hair dryer into a sink full of water could create a serious safety issue when no GFI protection exists to trip power off. 
  • Lack of 110-degree hot water.
  • Water heater venting concerns (or water heater installed inside a bathroom). Having gas burning devices in a bedroom, or a bedroom closet, has inherent Carbon Monoxide poisoning risks, and stricter requirements for solid core or fire rated doors with smoke seals take effect in such situations. 
  • Electrical panel covers missing or missing breakers without breaker filler plate (~$4/each on Amazon)
  • Trip hazards or deteriorated walking surfaces. For example, extension cords running from one room to another are not permitted.
  • Exterior Stairs, especially if wooden. Stability and safety matter.
  • Holes in Walls and Ceiling  Deteriorated wall and ceiling require correction to prevent pest intrusion and provide barriers to the elements. Verification that all exterior doors and windows seal well.
  • Rodents or insect infestation issues. These simply need to be proactively addressed with pest management working a treatment plan. 
  • Missing outlet or switch covers or blank spaces in the electrical panel where a breaker was removed without inserting plastic blank filler. The goal is an electrical system where a curious child with a butter knife cannot access energized components. 
  • Basement apartments  (Denver specific)
    • Lacking a solid core door (or ideally, fire rated door) to the utility room if it has gas burning appliances, with the door having smoke seals on all 4 sides (weatherstripping).
    • Lacking external combustion air to furnace room (furnace consumes oxygen from inside the unit)
    • Must have at least 2 egresses unless “grandfathered”. Per City of Denver guidance, any conversion creating separate basement apartments completed post 1991 must have 2 compliant means of egress. 

Important:
A non-passing inspection is not uncommon and should not be viewed as a crisis. What matters most is having a clear path to resolution. Part of my job is advising you on how to get to a passing report cost effectively. 

Most of the items above are simple, low-cost items. And even if they weren’t, physical harm to an individual because of their lack would be far more costly and gut wrenching to all parties involved. 

This is not about pass vs. fail—it’s about achieving compliance efficiently while reducing liability exposure. 

Corrections:

Life-safety devices should be selected with long-term reliability in mind, not simply minimum compliance.

A functioning alarm or extinguisher can save you from tens of thousands of dollars of damages and liabilities. I recommend national name brands versus online shopping bargain knockoffs that may lack regulatory oversight and reputable testing and product validation. 

A random ultra-cheap alarm with questionable certification may beep when pressing the Test button or during a canned smoke test, yet still perform poorly in real fires, especially with smoldering low smoke fires or the smoke from certain synthetic materials. 

Fire blankets can be ancillary protection, but they do not replace fire extinguishers or fulfill the code requirement for a fire extinguisher. 


From Inspection to License — What to Expect

Understanding the typical flow helps prevent scheduling pressure and unnecessary urgency.

Typical Licensing Path:

1. Schedule Inspection
Allow adequate lead time before your licensing deadline.

2. Inspection Occurs
If corrections are needed, you will receive a report identifying required items.

3. Complete Corrections (if needed)
Generally minor, such as installing smoke and CO alarms, fire extinguishers and GFI outlets, but varies depending on your actual property. 

4. Reinspection (if required)
Confirms that safety items have been addressed. In many cases, photographic evidence suffices to pass without a separate reinspection trip involving reinspection fees.  

Best way to document compliance for multi-unit inspections: take a picture of house number or unit door showing unit number, then take pictures of the corrections inside the unit. This keeps your camera roll in clear order of which correction was performed at which unit or property. 

5. Submit Final Documentation
Upload your passing report with your license application.

In Boulder, the licensing application is low effort and straight forward.  

In Denver, the licensing application is a variant of the Marijuana Dispensary licensing application, with 4 separate application components –  the Application Package, the Licensed Entity, the Licensed Establishment, and finally the Residential Rental License. Many first-time users report the Denver licensing application taking about 3-4 hours. 

We may be able to assist you with this process for a fee. 


Professional Insight:

Correction cycles often take longer than expected. In the past, I’ve seen large apartment complexes need to order new smoke alarms for every single 2-bedroom apartment, which can create a logistical challenge in terms of sourcing hundreds of smoke alarms.  

Early scheduling provides operational flexibility and reduces stress.


30-Minute Pre-Inspection Preparation Checklist

A brief walkthrough before your scheduled inspection can prevent many delays.

Quick Preparation Steps:

  •  Verify smoke and carbon monoxide alarms, ensure 1 smoke alarm inside each bedroom, and a smoke and CO alarm in the hall within 15’ of all bedrooms and also a CO and Smoke alarm on each level of the home. 
    Ensure these alarms are less than 10 years old, anything older must be replaced. 
  • Confirm every bathroom is GFI protected. Either each bathroom has separate GFI’s, or, in newer homes common in locales like Green Valley Ranch turning off the one GFI trips power to the other bathroom outlets.
  • Ensure at least one fire extinguisher exists and is less than 6 yrs old – date of manufacture stamped on bottom of can or printed on right side of label.
    Multifamily apartments must have 2A:10BC type extinguishers, these can be shared in a common area less than 75’ from the doors it serves. 
  • Replace missing outlet and switch covers
  • Confirm utilities are active
  • Clear access to the electrical panel and ensure that there are no missing breakers leaving the electrified panel interior accessible to a curious kid with a butter knife.
  • Ensure no holes in walls or ceilings, and that all exterior doors and windows seal well.
  • Ensure that any infestation issues – rodents or insects can be proactively addressed with pest management working a treatment plan. 
  • Remove obvious trip hazards – for example, extension cords running from one room to another are not permitted.

Some housing providers choose to conduct an internal walkthrough using this checklist several days before the inspection – this can be worthwhile for just purchased/management transition of properties tending to need more work.  

In established, well-maintained communities, other managers opt to inspect and have staff ready to fix deficiencies noted to minimize the number of notifications and access requests for tenants. The most common non-compliances of missing smoke / CO alarms can be rapidly addressed by a maintenance person trailing the inspection team.  

More intensive corrections – installing bath GFI outlets, for example, could be handled by a second, trailing maintenance person or electrician.   This means that the only access required to residents’ units is the day of inspection/correction.


Random Selections of Units in Denver Apartment Complexes

If your property has multiple units, Denver does not require an inspection of every unit. Instead, they require a random sample of 10% of the dwelling units, rounded.

By contrast, Boulder requires inspection of 100% of dwelling units. 

The 10% rule (Denver version)

  • 2–10 units: 1 unit
  • 11-14 units: 1 inspection (rounded down)
  • 15-24 units: 2 inspections (rounded)

Example: 54-unit building → 5 units inspected

  45-unit building → 5 units inspected

Key requirement: random selection with the caveat of selecting and inspecting below grade units. 

Denver’s Rules as of the time of publication: “The number of units inspected is 10% of the total units randomly selected by the inspector plus checklist items related to shared utilities or common areas. For any property where there is a below grade unit, item 5.3 ( free of leaks) must be verified for all below grade units.”

The units must be randomly selected—not hand-picked – with additional requirements for below-grade units being included.

In order to fully comply with the Denver inspection requirements, we must inspect a number of below grade units and verify that all units below grade are not subject to flooding or water intrusion.  

From a safety perspective, the below grade units are also often located on the same level as the gas-fueled heating equipment, and since CO presents elevated risk in basement units, particularly near fuel-burning equipment. 

Consequently, the rules require that we review the randomly selected units and tweak the selection to ensure that:

  • no vacant units are selected– vacant units are strictly excluded. 
  • We ensure also including below grade units in every building where any such units exist to verify that no moisture intrusion problems are present. 

Denver requires occupied units in the sample. Renovated, vacant units are deemed not representative of real occupied unit conditions. 

This means that if a tenant vacates between unit selection and the actual inspection, we will need to substitute a neighboring occupied unit.

 Practical strategy (what actually works)

1) Over-select slightly: Select and notify 10–15% more units than require, for the following reasons:

  • Access issues – i.e. tenant changed locks.
  • Tenants cancel due to illness or emergency. While I’m not a medical professional, the population of people selected for rental inspection appears to have an elevated risk of contracting covid and other easily transmissible infections. 
  • Pets can prevent entry.  

Denver Rules around how many Inspections are Required for Adjacent Properties

At the time of this writing, and this has changed in the past: “Single unit properties require an individual license. Multiunit properties, a single license can be issued for multiple units, addresses, or structures if they are all located on a single or contiguous parcels and under the same ownership”

What this means:

Adjacent rowhomes/townhomes/split duplexes/etc. that are separate legal parcels need to be individually inspected and licensed separately.

Multi-unit properties on a single legal parcel need just 10% of units inspected and one license per parcel.

Condominium units in the same condo complex under the same ownership can be inspected like multi-unit properties, just inspecting 10% of the units and obtaining one single license for the multiple condo units owned. 


Boulder Multifamily Inspection Rules:

All units must be inspected in Boulder.  100%. No random selection, or picking alternate units in case one tenant changed locks. 

Managing Licensing Across Multiple Properties

Portfolio oversight of multiple houses/apartment buildings requires a slightly different strategy than single-property licensing.


Recommended Best Practices:

Schedule Early
Aim for 90 days before deadlines.

Cluster Inspections Geographically
Reducing travel time increases scheduling flexibility.

We can help minimize inspection drive times by creating an optimized route

Track Renewal Dates Centrally
Avoid last-minute scrambles.

Budget for Correction Windows
Even well-maintained units may require minor updates. One of the most common inspection bottlenecks is tenants removing and discarding smoke alarms. The newer, recommended by regulations, 10-year sealed lithium-ion battery alarms have a not inconsequential failure rate, and can need replacement of the entire unit as soon as 18 months from the date of installation, since it’s no longer possible to just replace the battery. 

Avoid Seasonal Bottlenecks
Inspection demand often rises near compliance deadlines.  For Denver, the end of 2026 and the end of 2027 will once again see intense demand. This is likely to also be reflected in slower license approval time-frames from the City licensing department.  

Also, the weather, and driving can be seasonally much better in November than in January, for example. 


Licensing a property that was previously licensed in Denver

If the seller / previous licensee of a Denver rental property didn’t surrender their rental license at closing, the process of licensing the property becomes more complicated.

The new license applicant must prove that they are entitled to a license, and submit to an additional review process that can add weeks to the license application process. The City’s workflows are not automated, and regularly, escalation to the City is required for them to correlate the surrender application to the new license application and actually approve the new license after validating the surrender documentation is adequate and approved. 

The best course is to have the prior licensee do the surrender and validate that to the new licensee, versus having to take the process on yourself.  

Educating title companies about this process could help in the future.


Operational Perspective:

Predictability — not urgency — is the hallmark of well-managed portfolios.

When Should You Schedule an Inspection?

While every property is different, proactive scheduling is one of the simplest ways to create a smoother licensing experience.

Recommended Timing:

60-90 days before your license deadline

  • This allows time for Tenant coordination, any corrections, as needed, and timely license application within the Denver 90-day window. 

Early action reduces operational disruption.


A Note on Inspection Outcomes

An inspection should provide clarity.

When expectations are understood, housing providers can make informed decisions, prioritize appropriately, and move toward compliance without unnecessary friction.

A few housing providers also choose to send tenants a pre-inspection questionnaire to better understand property condition and reduce the likelihood of surprises.

Sample tenant pre-inspection questionnaire: (this focuses on the key items, not the entire checklist)

  • Does every bedroom have a functioning smoke alarm dated less than 10 yrs old?
  • Does the hallway on every level have a functioning smoke and CO alarm (or combination alarm) dated less than 10 yrs old?
  • Does the unit have a fire extinguisher dated less than 6 years old?
  • Does each bathroom have GFI protection? (Outlet with Test/Reset buttons, sometimes tripping test in one bath turns off power to other bathroom outlets)
  • Does all the electrical function correctly?
  • Are there any infestation issues?
  • Are there any other possible issues worth noting?

Resources:

Denver checklists and checklist guides are updated regularly, use a search engine to find the most recent ones. Boulder’s more long-established program also updates yet, much more rarely. These resources are also easily located using google. 


Final Thought

Denver’s licensing standards are designed to support safe housing. With the right preparation and a clear understanding of expectations, the process becomes far more manageable, and even a part of proactive, rigorous property management.

Calm, organized execution using a quality, sympathetic provider who helps optimize this, can make all the difference between a stressful experience and a smooth and predictable one.


Inspection Clarity for Denver Rental Licensing

Trusted by Colorado housing providers who value smooth, drama-free inspections.

Schedule with confidence:
Hasso Fleming Schutrumpf, Rental Inspections LLC

rentinspector@gmail.com

303 717 8549

Rentalinspectordenver.com